Shielded Miniature Ball Bearings are single-row deep groove ball bearings fitted with non-contact metal shields on one or both sides. The metal shield retains lubricant and reduces the entry of ordinary solid contaminants while maintaining low-friction performance in compact rotating assemblies.
Shielded Miniature Ball Bearings at a Glance
|
Parameter / Metric |
Standard Technical Options |
|
Bearing Type |
Single-row deep groove ball bearing |
|
Shield Configurations |
Z (Single Shield), ZZ / 2Z (Double Shield) |
|
Bearing Materials |
High-Carbon Chrome Steel (GCr15 / AISI 52100), Martensitic Stainless Steel (AISI 440C), Austenitic Stainless Steel (AISI 304 / 316) |
|
Precision Classes |
ISO P0, P6, P5, P4 / ABEC-1, ABEC-3, ABEC-5, ABEC-7 |
|
Radial Internal Clearance |
C2 (Tight), CN (Normal), C3 (Loose), C4 |
|
Primary Dimensions |
Bore (d), Outside Diameter (D), Width (B) |
|
Main Functions |
Lubricant retention, friction reduction, protection from solid debris |
|
Key Applications |
Small electric motors, cooling fans, encoders, printers, medical devices, automation mechanisms |
Closure Type Comparison Matrix
|
Operational Requirement |
Open Type |
ZZ / 2Z Metal Shield |
2RS Rubber Contact Seal |
|
Solid / Dust Protection |
Low |
Moderate |
High |
|
Liquid / Water Resistance |
None |
Low (Splash Limited) |
High (Contact Lip) |
|
Lubricant Retention |
Requires External Grease/Oil |
Excellent (Pre-lubricated) |
Excellent (Pre-lubricated) |
|
Friction / Starting Torque |
Extremely Low |
Low (Non-Contact Gap) |
Moderate to High (Contact Friction) |
|
High-Speed Capability |
Maximum |
High |
Limited by Seal Drag |
|
Recommended Environment |
Sealed Housings / Ultra-clean |
Clean to Standard Industrial |
Wet, Dusty, or Outdoor |
Step-by-Step Bearing Selection Guide
Dimensional Matching (d x D x B): Match bore size (d) to shaft diameter, outside diameter (D) to housing, and width (B) to axial space constraints.
Material Selection:
- Chrome Steel (GCr15 / AISI 52100): High hardness (58-65 HRC), high load capacity, cost-effective for standard environments.
- Martensitic Stainless Steel (AISI 440C): High hardness with strong corrosion resistance for humid or medical setups.
- Austenitic Stainless Steel (AISI 304 / 316): Chemical resistance for hostile environments (lower load ratings).
Precision Tolerance Class: Select ABEC-1 / ISO P0 for standard mechanisms, ABEC-3 / ISO P6 for electric motors, and ABEC-5 or ABEC-7 (ISO P5 / P4) for high-speed spindles and precision encoders.
Radial Internal Clearance: Choose C2 for ultra-low noise and tight precision, CN (Normal) for standard operation, or C3/C4 for high thermal expansion or interference fits.
Load & Speed Ratings: Verify dynamic (C) and static (C0) radial/axial load limits against application duty cycles.
Lubrication Engineering: Select grease viscosity, operating temperature limits (e.g., -40 deg C to +150 deg C), and grease fill volume (typically 20% to 35% fill) based on application RPM.
Manufacturing Quality Control & Inspection
Raceway Superfinishing: Precision polishing of inner and outer ring raceways minimizes vibration and running noise.
Precision Ball Sorting: Utilizing Grade 5 or Grade 10 micro-sorted steel balls guarantees uniform internal load distribution.
Automated Shield Assembly: Press-fitting shields ensures rigid retention without distorting the outer ring.
Grease Metering Control: Automated dispensing systems maintain accurate grease fill weights across volume runs.
Vibration & Noise Testing: 100% accelerometer testing (e.g., Anderon rating) for low-noise motor-grade applications.
FAQ
Q: What is the main structural difference between ZZ and 2RS bearings?
A: ZZ (or 2Z) features non-contact metal shields that leave a tiny gap against the inner ring, offering lower friction and higher speed capability. 2RS features rubber contact seals that physically touch the inner ring, providing superior liquid and dust protection at the cost of higher rotational drag.
Q: Are ZZ metal-shielded miniature bearings waterproof?
A: No. Metal shields are non-contact barriers designed for retaining grease and blocking coarse particles. They do not form a liquid-tight barrier against water, high humidity, or chemical spray.
Q: How do I choose between ABEC-3 (ISO P6) and ABEC-5 (ISO P5) precision classes?
A: ABEC-3 is the standard choice for general electric motors, fans, and automation mechanisms. ABEC-5 offers tighter tolerances on runout, bore variance, and width control, making it necessary for high-speed spindles, medical equipment, and high-resolution optical encoders.
Q: Why is grease fill percentage critical for high-speed miniature bearings?
A: Over-filling grease (e.g., above 50%) increases internal fluid drag, leading to severe heat buildup and torque spikes at high RPMs. Standard miniature bearings usually specify a 20% to 35% grease fill volume to balance life span and speed.
Q: Can stainless steel miniature bearings handle the same loads as chrome steel bearings?
A: Martensitic stainless steel (AISI 440C) achieves approximately 85% to 90% of the load capacity of standard chrome steel (GCr15 / AISI 52100). Austenitic stainless steels (AISI 304/316) offer superior chemical resistance but have significantly lower dynamic load capacity.
Hot Tags: shielded miniature ball bearings, China shielded miniature ball bearings manufacturers, suppliers, factory, Thin Section Deep Groove Ball Bearings

