Flanged Miniature Ball Bearings

Flanged Miniature Ball Bearings
Details:
Flanged miniature ball bearings feature an integral flange on the outer ring that serves as a primary locating surface. This design eliminates the need for separate snap rings or stepped housings, simplifying assembly and reducing overall housing manufacturing costs.
Send Inquiry
Description
Send Inquiry

Flanged miniature ball bearings feature an integral flange on the outer ring that serves as a primary locating surface. This design eliminates the need for separate snap rings or stepped housings, simplifying assembly and reducing overall housing manufacturing costs.

 

Quick Technical Selection Guide

 

Parameter

Symbol

What to Verify

Key Standards & Technical Notes

Bore Diameter

d

Shaft diameter and fit class

Fits like k5 or m5

Outside Diameter

D

Housing bore diameter and fit class

Fits like H7 or J7

Bearing Width

B

Available axial installation space

Standard vs. extended width options

Flange Diameter

Df

Housing locating face area

Verify radial clearance with adjacent components

Flange Thickness

Bf

Axial seating and positioning accuracy

Ensures flush mounting against housing

Precision Class

ISO / ABEC

Assembly runout and torque requirements

ABEC-1 (P0), ABEC-3 (P6), ABEC-5 (P5)

Material

-

Operating environment & corrosion needs

GCr15 Chrome Steel vs. AISI 440C Stainless

Dynamic Load Rating

Cr

Continuous operating load capacity

Evaluated against required L10 service life

Static Load Rating

Cor

Peak, shock, or stationary load capacity

Prevents permanent raceway deformation

Limiting Speed

n

Maximum operational RPM

Dependent on seal friction and lubricant type

Internal Clearance

Radial

Post-assembly play after press fit

C2 (Tight), CN (Normal), C3 (Loose)

Sealing / Lubrication

-

Contamination exposure & maintenance

Open, shielded (ZZ), or rubber sealed (2RS)

 

Technical Specifications & Material Standards

 

Feature

Technical Specification

Standard / Compliance

Precision Classes

ABEC-1 (P0), ABEC-3 (P6), ABEC-5 (P5)

ISO 492 / ANSI/ABMA Std 20

Chrome Steel

GCr15 / AISI 52100

High wear resistance, maximum fatigue life

Stainless Steel

AISI 440C (Standard) / AISI 304 & 316 (Special)

Corrosion-resistant for humid or medical environments

Vibration & Noise

Z1V1, Z2V2, Z3V3 Grade Testing

100% Anderometer tested for quiet operation

Environmental Compliance

Directives & Factory Certification

RoHS 3 Compliant, REACH Compliant, ISO 9001:2015

 

Flanged Vs. Non-Flanged Miniature Bearings

 

Technical Requirement

Flanged Miniature Bearing

Non-Flanged Miniature Bearing

Integral Locating Surface

Yes (Outer ring flange)

No

Axial Positioning

Direct & Simplified (Flange seats on housing face)

Requires internal housing shoulders or spacers

Retaining Components

Eliminated (No retaining or snap rings needed)

Required (External retaining rings or stepped bores)

Housing Machining

Through-bored housing (Lower machining cost)

Stepped or double-recessed housing required

Replacement Check

Verify d, D, B, Df, Bf and flange offset position

Verify d, D, B and housing shoulder specs

 

Shielding & Sealing Configurations

 

Open Type (Unshielded): Best for enclosed, ultra-clean environments with oil bath or mist lubrication. Delivers lowest running torque and highest speed capability.


Shielded Type (ZZ / 2Z - Metal Shields): Best for controlled environments needing non-contact protection against dust. Pre-lubricated with factory grease; maintains friction-free operation.


Sealed Type (2RS / 2RSR - Contact Rubber Seals): Best for high-dust, particulate, or moisture environments. Maximum protection and grease retention, with slightly lower speed limits due to seal lip friction.

 

Production & Quality Control Process

01/

Raw Material Inspection: Spectrographic chemical analysis of raw steel stock.

02/

Heat Treatment: Controlled atmosphere hardening and tempering for dimensional stability.

03/

Precision Grinding: CNC grinding of raceways, inner/outer diameters, and flange seating surfaces.

04/

Superfinishing: Honing raceways to micro-inch tolerances to minimize friction and noise.

05/

Automated Inspection: Laser measurement of critical dimensions (d, D, B, Df, Bf), radial runout, and 100% noise/vibration testing.

06/

Cleaning & Packaging: Ultrasonic washing, precision grease metering, and vacuum-sealed anti-rust packaging in cleanroom conditions.

6 Common Procurement Mistakes to Avoid

 

Selecting by Bore (d) and OD (D) Only: Ignoring flange thickness (Bf) or flange diameter (Df) causes mechanical interference during assembly.


Overlooking Flange Offset Position: Purchasing bearings with identical outer dimensions but incorrect flange seating positions.


Ignoring Temperature Impact: Failing to select larger internal clearance (C3) for elevated operating temperatures causes thermal expansion seizure.


Selecting Contact Seals for Ultra-High Speeds: Friction from contact rubber seals (2RS) causes overheating at high RPMs; use metal shields (ZZ) instead.


Uncontrolled Grease Specifications: Changing grease types without engineering review alters starting torque and service life.


Choosing Unit Price Over Batch Consistency: Initial low-cost samples often mask wide dimensional variations in volume production, leading to high assembly rejection rates.

 

Supplier Evaluation Criteria for OEM Buyers

 

Traceability & Inspection Records: Can the supplier provide certified 3.1 material test reports and CMM inspection sheets per production lot?


OEM Customization Support: Capability to modify flange dimensions, adjust internal clearances, or apply custom grease fills.


Production Continuity: Guarantees that identical tooling and grinding processes are maintained for repeat orders.


Export Packaging: Sealed, anti-static tube packaging designed to withstand international transit and support automated feed lines.

 

Complete RFQ Checklist

 

Part Number / Reference

(E.g., MF105ZZ, F682X-2RS, or custom CAD drawing)

Key Dimensions

Bore (d), OD (D), Width (B), Flange Diameter (Df), Flange Thickness (Bf)

Precision Class

ABEC-1 (P0), ABEC-3 (P6), or ABEC-5 (P5)

Material Requirement

Chrome Steel (GCr15) or Stainless Steel (440C)

Sealing Configuration

Open, Metal Shielded (ZZ), or Rubber Sealed (2RS)

Internal Clearance

C2 (Tight), CN (Normal), or C3 (Loose)

Operating Parameters

Radial/Axial Loads (N), Rotational Speed (RPM), Operating Temp (°C)

Lubrication

Standard factory grease, high-temp grease, or custom customer-specified oil

Order Quantities

Initial sample requirements and annual production volume

 

FAQ

 

Q: What is the main structural benefit of using a flanged miniature ball bearing?

A: The integral flange on the outer ring acts as a fixed locating face. This eliminates the need for external retaining rings, snap rings, or complex stepped housing machining, allowing engineers to design thinner, lighter, and more cost-effective compact housings.

Q: Can a flanged bearing directly replace a non-flanged bearing of the same bore and OD?

A: Not automatically. While the bore (d) and outside diameter (D) may match, you must verify that the housing has clearance for the flange diameter (Df) and flange thickness (Bf). The flange offset position must also align with the axial location of the shaft.

Q: How do I select the right internal clearance (C2, CN, C3) for miniature bearings?

A: CN (Normal) is suitable for standard interference fits and normal temperatures. C2 (Tight) is selected when low radial play and high running accuracy are required (e.g., precision instruments). C3 (Loose) is necessary for high-speed applications or operating environments with significant temperature differentials to prevent thermal binding.

Q: Can flange dimensions be customized for OEM applications?

A: Yes. OEM suppliers can customize the flange diameter (Df), flange thickness (Bf), and flange location on the outer ring according to customer technical drawings.

Q: Why is ABEC precision class critical for flanged miniature bearings?

A: In miniature applications, small manufacturing deviations lead to high rotational torque, noise, and early failure. Higher ABEC classes (such as ABEC-3/P6 or ABEC-5/P5) deliver tighter tolerances on bore runout, outer ring runout, and flange face squareness, ensuring smoother rotation in high-speed or low-torque devices.

Hot Tags: flanged miniature ball bearings, China flanged miniature ball bearings manufacturers, suppliers, factory, Thin Section Deep Groove Ball Bearings

Send Inquiry