Compact metric ball bearings engineered for small shafts, restricted housing spaces, and high-precision rotating assemblies. Manufactured to ISO 15 standards and ABEC-1 to ABEC-5 (ISO P0 to P5) precision classes, these components deliver reliable rotational performance across medical devices, small motors, robotics, and automation equipment.
Key Technical Parameters
|
Parameter |
Standard / Specification Options |
Application & Selection Impact |
|
Bearing Designation |
ISO / JIS standard coding (e.g., 682, 693ZZ, MR105-2RS) |
Defines series, dimensions, and sealing style |
|
Bore Diameter ($d$) |
1 mm to 9 mm (Metric) |
Matches shaft diameter and interference fit (g6, h6, k5) |
|
Outside Diameter (D) |
3 mm to 16 mm |
Matches housing bore and mounting tolerance (H7, J7) |
|
Width (B) |
1 mm to 5 mm |
Defines available axial installation space |
|
Precision Class |
ABEC-1 (P0), ABEC-3 (P6), ABEC-5 (P5) |
Controls running accuracy, radial runout, and noise level |
|
Internal Clearance |
MC1 to MC6, C0, C2, C3 |
Accommodates thermal expansion and mounting fits |
|
Dynamic Load Rating (C_r) |
Model specific (100 N to 1,500 N) |
Determines fatigue life under continuous operation |
|
Static Load Rating (C_0r) |
Model specific (40 N to 800 N) |
Sets peak non-rotating or shock load limits |
|
Limiting Speed |
Up to 60,000 RPM (Grease) / 70,000 RPM (Oil) |
Governed by cage design, lubricant, and seal friction |
|
Material Options |
SAE 52100 Chrome Steel, AISI 440C / 304 Stainless |
Determines load capacity, hardness, and corrosion resistance |
|
Closure Type |
Open, Metal Shields (ZZ), Rubber Seals (2RS) |
Controls torque, speed capability, and contaminant protection |
|
Lubrication |
Synthetic Grease (Kluber, Mobil), Instrument Oil |
Rated for temperatures from -40 degrees C to +150 degrees C |
Bearing Configurations Comparison
|
Configuration |
Construction |
Friction & Speed |
Protection Level |
Typical Applications |
|
Open |
No seals or shields |
Lowest torque, highest speed |
None (requires clean housing) |
High-speed spindles, enclosed gearboxes |
|
Shielded (ZZ) |
Non-contact metal plates |
Low torque, high speed |
Protection against large particles |
Small motors, fans, office automation |
|
Sealed (2RS) |
Contact rubber lips (NBR/Viton) |
Moderate torque, limited speed |
High protection against dust & moisture |
Outdoor devices, medical pumps, 3D printers |
|
Flanged (F/MF) |
Integrated outer ring flange |
Same as base configuration |
Simplifies axial positioning |
Thin-walled housings, sheet metal mounts |
|
Stainless Steel |
AISI 440C / 304 material |
Same as base configuration |
Corrosion & chemical resistance |
Surgical instruments, food processing |
Step-by-Step Selection Methodology
Verify Shaft & Housing Fits: Match the inner ring to shaft tolerances (such as h6 or k5) and outer ring to housing fits (H7). Over-tight fits reduce internal radial clearance and lead to premature failure.
Calculate Applied Loads: Evaluate combined radial and axial loads. Ensure static load factors do not exceed during peak shock loading.
Determine Speed & Thermal Conditions: Select lubrication based on continuous operating RPM. High-speed applications require low-viscosity synthetic oils or specialized light greases.
Select Internal Clearance Class: Account for thermal expansion between the shaft and housing. Standard MC3 or C0 clearance is suitable for general applications, while C3 or higher is required when shaft temperatures exceed housing temperatures.
Manufacturing Capabilities & Quality Control
|
Process / Inspection Area |
Facility Specification & Testing Equipment |
Quality Assurance Standard |
|
Production Equipment |
Automated CNC raceway grinding, superfinishing lines, ultrasonic washing |
ISO 9001:2015 certified process |
|
Material Integrity |
Vacuum-degassed SAE 52100 / AISI 440C stainless steel |
Mill test report (MTR) verification |
|
Dimensional Inspection |
Pneumatic length gauges, optical comparators, digital height indicators |
100% bore, OD, and width check |
|
Clearance Verification |
Automated radial clearance testing equipment (MC1–MC6 validation) |
Checked against ISO radial clearance standards |
|
Acoustic & Vibration |
BND-3 / S0910 vibration velocity meters |
100% noise level screening |
|
Traceability & Reports |
Material certs, 2D/3D CAD drawings, full lot identification |
Available for every OEM shipment batch |
Target Application Profiles
Small Electric Motors & Actuators: Low-vibration, high-speed performance with low running noise (ABEC-3/ABEC-5).
Medical & Dental Instrumentation: Stainless steel construction withstanding sterilization cycles and high RPM demands.
3D Printers & Automation Mechanisms: Smooth linear and rotational movement supporting continuous duty cycles without stick-slip motion.
Robotics & Drones: Compact, light-weight assemblies prioritizing precise spatial dimensions and minimal start-up torque.
Technical RFQ Requirements
To receive an accurate specification match and price quotation, submit the following details:
Primary Dimensions: Bore, Outside Diameter, Width or existing industry bearing code.
Operating Conditions: Shaft RPM, applied radial/axial load, operating temperature, and duty cycle.
Environmental Factors: Contamination exposure, washdown requirements, and housing enclosure type.
Configuration Preferences: Precision rating, clearance class, seal/shield type, grease type, and target volume per batch.
FAQ
Q: What is the difference between ABEC-1, ABEC-3, and ABEC-5 precision classes in miniature bearings?
A: ABEC classes (equivalent to ISO P0, P6, and P5) define dimensional tolerances and running accuracy. ABEC-1 is the standard grade suitable for general mechanical assemblies. ABEC-3 and ABEC-5 offer tighter tolerances on bore/OD dimensions and lower radial runout, making them essential for high-speed electric motors, medical handpieces, and precision instruments where low noise and low vibration are critical.
Q: Should I select metal shields (ZZ) or rubber seals (2RS) for my miniature bearing application?
A: Select metal shields (ZZ) if your application requires high rotational speeds, low starting torque, and operates in a relatively clean environment. Select contact rubber seals (2RS) when protection against fine dust, dirt, or moisture is required, or when lubricant retention is critical, though 2RS seals slightly increase rotational friction and reduce the limiting speed.
Q: How does shaft fit affect the internal clearance of a miniature bearing?
A: Installing a bearing with an interference fit (press fit) on a shaft expands the inner ring, which reduces the internal radial clearance. If the initial internal clearance (such as MC1 or MC2) is too small, an interference fit can cause zero clearance or preloading, leading to increased friction, elevated operating temperatures, and early fatigue failure.
Q: When should I choose AISI 440C stainless steel over SAE 52100 chrome steel?
A: Choose AISI 440C stainless steel when the bearing operates in moist, humid, or corrosive environments, or requires frequent sterilization (such as in medical or food processing equipment).
Q: What technical documentation is included for OEM purchasing orders?
A: OEM shipments can be provided with full production documentation, including 2D/3D CAD dimensional drawings, material mill test certificates, ISO 9001 inspection reports (covering bore, OD, width, and radial clearance), acoustic vibration test results, and batch lot traceability records.
Hot Tags: metric miniature ball bearings, China metric miniature ball bearings manufacturers, suppliers, factory, Thin Section Deep Groove Ball Bearings

