Sealed miniature ball bearings support small rotating shafts where installation space is restricted and contamination protection, running accuracy, and low torque must be balanced. Designed in compliance with ISO 15 dimensional standards and ABEC-1 (P0) to ABEC-7 (P4) precision classes, these bearings deliver reliable rotational performance in compact assemblies.
Closure Type Comparison
|
Closure Type |
Code |
Dust Protection |
Moisture Resistance |
Friction / Torque |
Max Speed Capability |
Common Materials |
|
Rubber Contact Seal |
2RS / LLU |
Excellent |
Good |
Moderate |
Standard |
NBR (Standard), FKM (High Temp) |
|
Non-Contact Seal |
2RZ / VV |
Good |
Fair |
Low |
High |
NBR / FKM |
|
Metal Shield |
ZZ / Z |
Fair |
Poor |
Minimal |
Very High |
AISI 304 Stainless / Carbon Steel |
Technical Specifications & Selection Parameters
All technical specifications are verified against approved technical drawings before mass production:
|
Specification Parameter |
Standard Options / Classes |
Design & Application Note |
|
Boundary Dimensions |
Bore: 1mm to 10mm (ISO 15 compliant) |
Must align with shaft, housing, and available axial space |
|
Precision Class |
ABEC-1 (P0), ABEC-3 (P2), ABEC-5 (P5), ABEC-7 (P4) |
Higher classes ensure lower runout and smoother high-speed rotation |
|
Radial Internal Clearance |
C2, CN (Normal), C3, C4 |
Select based on interference fits, speed, and thermal expansion |
|
Ring & Ball Material |
Chrome Steel (100Cr6 / SAE 52100), Stainless Steel (440C) |
Chrome steel for load capacity; 440C for corrosion resistance |
|
Lubrication Options |
Standard (-20°C to +120°C): Kyodo Yushi Multemp PS No. 2 High Temp (+150°C to +200°C): Klüber quiet BQH 72-102 / Mobil Polyrex EM |
Pre-lubricated for life; standard grease fill volume is 30% to 40% |
|
Noise & Vibration |
100% screened via S0910 vibration testing |
Critical for electric motors, fans, and medical devices |
Engineering & Selection Guidelines
Fits & Clearance: Shaft and housing fit tolerances must be evaluated together with internal clearance. Excessive interference fits reduce internal clearance, increasing operating temperature and risk of premature fatigue.
Operating Environment: For clean, high-speed environments, metal shields (ZZ) minimize friction. For dusty or high-humidity environments, rubber contact seals (2RS) prevent lubricant migration and ingress of contaminants.
Load Capabilities: Deep groove miniature bearings handle primary radial loads and moderate axial loads in both directions.
Applications
Small Electric Motors & Blowers
Requires low noise, minimal torque, and long grease retention.
Automation & Encoders
Demands strict runout limits (ABEC-5 or higher) and precise axial positioning.
Medical & Precision Instruments
Utilizes stainless steel (440C) construction with low-outgassing or NSF H1 food-grade lubricants.
Alternative Bearing Options
Standard sealed miniature ball bearings may not be suitable if your application involves:
Temperatures exceeding +220°C or cryogenic vacuum conditions.
Severe shock loading or heavy axial thrust loads (consider angular contact bearings).
Direct exposure to strong corrosive acids without specialized ceramic hybrid materials (Si3N4 balls).
Quality Control & Commercial Guarantees
100% Quality Screening: Individual inspection for bore/OD dimensions, radial runout, and vibration/noise performance.
Traceability & Certification: Full batch identification linked to EN 10204 3.1 Inspection Certificates, RoHS, and REACH documentation.
OEM Commercial Terms: Rapid 3–5 day sample preparation for qualified engineering projects; batch-to-batch consistency guaranteed on all repeat orders.
FAQ
Q: Can I replace an open or metal-shielded (ZZ) bearing with a rubber-sealed (2RS) bearing?
A: Not automatically. While boundary dimensions (Bore x OD x Width) may match, contact rubber seals introduce friction torque that lowers maximum operating speed and increases operating temperature. Always confirm operating RPM and temperature limits before switching.
Q: What is the main difference between Chrome Steel (52100) and Stainless Steel (440C) miniature bearings?
A: Chrome steel offers superior load-carrying capacity and longer fatigue life under normal conditions. Stainless steel (440C) provides high corrosion and moisture resistance, making it essential for medical, washdown, or high-humidity applications.
Q: How does internal clearance (C2 vs. CN vs. C3) affect bearing performance?
A: Internal clearance shrinks after the bearing is press-fitted onto a shaft or into a housing. Using C2 provides high precision and low vibration but requires precise tolerances. C3 clearance accommodates shaft expansion under high temperatures or tight interference fits.
Q: Are sealed miniature bearings lubricated for life, or do they require maintenance?
A: Sealed and shielded miniature bearings are pre-lubricated for life at the factory with a precise grease fill (typically 30% to 40% of internal volume) and do not require re-lubrication under normal operating conditions.
Q: What documentation is provided for OEM qualification?
A: We provide technical product data sheets, engineering drawings, material compliance certificates (RoHS/REACH), and EN 10204 3.1 inspection reports covering dimensional and runout checks upon request.
Hot Tags: sealed miniature ball bearings, China sealed miniature ball bearings manufacturers, suppliers, factory, Thin Section Deep Groove Ball Bearings

