What Are The Commonly Used Models Of Spherical Plain Bearings?

Nov 18, 2025

Leave a message

GAC Model
GAC is a type of radial spherical plain bearing with the following characteristics:

1. It can only withstand radial loads;

2. Unlike the GE model, the internal geometry of the GAC model is optimized, allowing for greater angular movement;

3. Suitable for bidirectional loading, possessing strong torsional stiffness and fatigue resistance.

The table below shows the common dimensions and parameters of GAC models:

Model | Dimension (mm) | Basic Static Load Rating (KN) | Basic Dynamic Load Rating (KN)

GAC25S | 25x47x15 | 86 | 259

GAC28S | 28x52x16 | 109 | 327

GAC30S | 30x55x17 | 128 | 385

GAC35S | 35x62x18 | 173 | 518

GAC40S | 40x68x19 | 209 | 626

 

GE Models
GE is a commonly used radial and radial/thrust spherical plain bearing with the following characteristics:

1. Can withstand radial and axial loads;

2. Slippage between the inner and outer rings allows for angular motion;

3. Suitable for low-speed and periodic motion.

The table below shows the common dimensions and parameters of GE models:

Model | Dimensions (mm) | Basic Static Load Rating (KN) | Basic Dynamic Load Rating (KN)

GE17ES | 17x30x14 | 71 | 212

GE20ES | 20x35x16 | 99 | 299

GE25ES | 25x42x20 | 156 | 469

GE30ES | 30x47x22 | 200 | 600

GE35ES | 35x55x25 | 293 | 880

 

SQ Model
SQ is a thrust spherical plain bearing with the following characteristics:

1. Can withstand thrust loads in only one direction;

2. Has good load-bearing capacity, with a contact angle of approximately 6° between the inner and outer rings;

3. Suitable for high loads, low speeds, and periodic motion.

The table below shows the common dimensions and parameters of SQ model bearings:

Model | Dimension (mm) | Basic Static Load Rating (KN) | Basic Dynamic Load Rating (KN)

SQZ20-RS | 20x54x15 | 28 | 65

SQZ22-RS | 22x58x16 | 31 | 72

SQZ25-RS | 25x66x18 | 41 | 94

SQZ28-RS | 28x72x20 | 53 | 124

SQZ32-RS | 32x84x23 | 70 | 164

 

SI Model Bearings

SI is a type of internally threaded thrust spherical plain bearing with the following characteristics:

1. Can withstand thrust loads in only one direction;

2. Has an internal threaded structure, suitable for mounting rods;

3. Suitable for high loads, low speeds, and periodic motion.

The table below shows the common dimensions and parameters of SI models:

Model | Dimension (mm) | Basic Static Load Rating (KN) | Basic Dynamic Load Rating (KN)

SI12E | 12x35x10 | 9.65 | 23.2

SI15E | 15x42x12 | 12.7 | 30.7

SI20E | 20x54x16 | 30.7 | 71

SI30E | 30x75x22 | 49.5 | 128

SI35E | 35x90x25 | 58 | 146

Send Inquiry