Single direction thrust ball bearings are specialized precision components designed to accommodate axial loads acting in a single direction. They maintain accurate axial shaft positioning under load while preventing radial deflection when paired with appropriate radial support.
Manufactured to ISO 104 and DIN 711 international standards, these assemblies consist of a shaft washer, housing washer, and a ball-and-cage assembly. They provide high load-carrying capacity within a compact axial envelope.
Technical Specifications
|
Parameter |
Technical Standard / Spec |
Procurement Checklist |
|
Standard Designation |
511, 512, 513, 514 Series (ISO 104 / DIN 711) |
Matches required series envelope |
|
Bearing Material |
High-carbon chromium steel (100Cr6 / GCr15 / SAE 52100) |
Heat-treated to 58-65 HRC |
|
Tolerance Class |
ISO Normal (P0), Class 6 (P6), Class 5 (P5) |
Verify running accuracy needs |
|
Cage Options |
Pressed steel, Machined brass (M), Polyamide (TN9) |
Select per RPM & temperature limits |
|
Operating Temp. |
-30 deg C to +120 deg C (Standard grease/steel cage) |
Confirm lubricant thermal limit |
|
Load Type |
Unidirectional axial load only |
Zero radial load capability |
Product Series Selection Guide
|
Series Profile |
Load Capacity |
Speed Rating |
Section Profile |
Typical Bore Sizes (d) |
|
511 Series |
Light |
High |
Extra-Light Section |
10 mm - 1000+ mm |
|
512 Series |
Medium |
Medium-High |
Light Section |
10 mm - 500+ mm |
|
513 Series |
Heavy |
Medium |
Medium Section |
20 mm - 360+ mm |
|
514 Series |
Very Heavy |
Lower |
Heavy Section |
25 mm - 280+ mm |
Technical Selection Workflow
Verify Axial Load Direction: Ensure the operating thrust acts in one direction continuously or intermittently. If reversing or bidirectional thrust forces occur, specify a double direction thrust bearing.
Evaluate Static & Dynamic Load Ratings: Dynamic Load Rating (C) is evaluated per ISO 281 for operational fatigue life calculations under continuous loads. Static Load Rating (C0) is evaluated per ISO 76 for peak, static, or heavy shock-loading conditions to prevent permanent raceway deformation.
Verify Speed and Lubrication Method: Compare actual shaft RPM against published limiting speeds. Oil lubrication typically extends speed capacity compared to standard grease lubrication.
Check Mounting Envelope: Confirm shaft shoulder diameter (da), housing shoulder diameter (Da), and housing fillet radii (ra) to ensure full washer seating and prevent stress concentrations.
4.Integrated Manufacturing & Quality Control Process
Material Control: Spectrometric chemical analysis on incoming SAE 52100 bearing steel coils/bars.
Precision Machining: Turning and dimensional profiling prior to heat treating.
Controlled Heat Treatment: Quenching and tempering to achieve 58-65 HRC core/surface hardness and dimensional stability.
Raceway Grinding & Superfinishing: Precision CNC grinding for optimized raceway curvature and low friction coefficients.
Ball Sorting: Precision grade sorting (ISO 3290 Grade 10 or better) to guarantee uniform load distribution across all rolling elements.
100 Percent Inspection & Testing: Final quality checks covering bore diameter, outside diameter, height tolerances, surface roughness (Ra), and vibration/noise levels.
Quality Documentation & Buyer Resources
We provide full material and inspection traceability for OEM and recurring industrial procurement. The following technical documentation is available upon request:
Certificate of Conformity (CoC)
Mill Test Report (MTR) / Material Analysis (EN 10204 3.1)
Dimensional & Hardness Inspection Reports
2D/3D CAD Models (STEP, IGES, DXF)
6.Request a Technical Quotation
For standard series inquiries or custom OEM developments, provide the following parameters for technical verification:
Example Request for Quotation (RFQ):
|
Bearing Designation |
51108 |
|
Order Quantity |
2,000 pcs |
|
Continuous Axial Load |
3.5 kN |
|
Peak Shock Load |
5.0 kN |
|
Operating Speed |
1,500 RPM |
|
Operating Temperature Range |
20 to 90 deg C |
|
Lubrication Type |
Grease |
|
Application |
Gearbox Output Shaft |
|
Quality Documentation Required |
Product Datasheet, MTR (EN 10204 3.1), and Final Inspection Report |
FAQ
Q: Can a single direction thrust ball bearing accommodate any radial load?
A: No. Single direction thrust ball bearings are designed exclusively for pure axial loads. Any radial load will disrupt ball tracking and cause premature bearing failure. For combined axial and radial loads, use a radial ball bearing, tapered roller bearing, or a combination arrangement.
Q: What is the primary operational difference between 511, 512, 513, and 514 series?
A: While bearings across these series may share the same inner bore diameter (d), higher series numbers (e.g., 513 vs. 511) feature larger outside diameters, thicker washers, and larger ball diameters. This increases axial load capacity at the expense of lower maximum operating speeds and a larger installation envelope.
Q: How do I distinguish between the shaft washer and the housing washer during installation?
A: The shaft washer has a ground bore that is slightly smaller than the housing washer bore, creating an interference or close sliding fit on the shaft.
Q: Which cage material should be selected for high-temperature or high-speed applications?
A: Standard pressed steel cages are suitable for most general applications. For high speeds, shock loads, or operating temperatures exceeding 120 deg C, machined brass cages (suffix M) are recommended.
Q: What technical documentation is provided to verify material quality and dimensional accuracy for OEM orders?
A: For OEM and industrial orders, buyers receive a Certificate of Conformity (CoC), dimensional and hardness inspection reports, and a Mill Test Report (MTR) per EN 10204 3.1 verifying chemical composition and heat treatment parameters of the SAE 52100 bearing steel.
Hot Tags: single direction thrust ball bearings, China single direction thrust ball bearings manufacturers, suppliers, factory, Thin Section Deep Groove Ball Bearings

