Double-row tapered bore self-aligning ball bearings accommodate angular shaft misalignment up to 2.5° while carrying radial loads. Manufactured in compliance with ISO 15 (boundary dimensions) and ISO 492 (tolerances) under ISO 9001:2015 and IATF 16949 certified quality systems, these bearings feature a 1:12 tapered inner bore (designated by the K suffix). They are designed for quick mounting with adapter sleeves on plain or stepped shafts without requiring high-precision shaft shoulders.
Technical Specifications & Standards
|
Parameter |
Specification Standard / Value |
|
Manufacturing Standards |
ISO 15 (Dimensions), ISO 492 (Tolerances) |
|
Quality Certifications |
ISO 9001:2015, IATF 16949 |
|
Bore Taper Ratio |
1:12 (Metric Suffix: K) |
|
Ring Material |
High-Carbon Chromium Bearing Steel (100Cr6 / SAE 52100 per ISO 683-17) |
|
Hardness Level |
58 - 65 HRC |
|
Raceway Surface Finish |
Ra <= 0.1 um |
|
Vibration & Noise |
100% inspected to Z2V2 / Z3V3 rating limits |
|
Radial Internal Clearance (RIC) |
ISO 5753-1 classes (C2, Normal, C3, C4) |
|
Adapter Sleeve Series |
H200, H300, H2200, H2300 |
|
Primary Load Profile |
High radial load capacity; limited two-way axial load |
Product Series Selection Matrix
|
Bearing Series |
Bore Taper |
Sleeve Series |
Section Width |
Key Selection Factors |
|
1200K |
1:12 |
H200 |
Compact / Narrow |
Moderate load, higher speed capacity, restricted radial space |
|
1300K |
1:12 |
H300 |
Medium / Narrow |
Higher radial load capacity within a narrow profile |
|
2200K |
1:12 |
H2200 |
Wide |
Moderate-to-heavy load capacity with extra lubricant volume |
|
2300K |
1:12 |
H2300 |
Extra Wide |
Maximum radial load rating and shock resistance in class |
Mounting & Clearance Reduction Guidelines
|
Nominal Bore d (mm) |
Initial Feeler Clearance (um) |
Clearance Reduction (um) |
Axial Drive-up Distance s (mm) |
Min. Residual Clearance (um) |
|
20 - 30 |
15 - 25 |
10 - 15 |
0.20 - 0.30 |
10 |
|
35 - 50 |
20 - 35 |
15 - 20 |
0.30 - 0.40 |
12 |
|
55 - 80 |
30 - 45 |
25 - 30 |
0.40 - 0.50 |
15 |
|
85 - 120 |
40 - 60 |
35 - 40 |
0.50 - 0.65 |
20 |
Tapered Bore vs. Cylindrical Bore
|
Feature |
Tapered Bore (K Suffix) |
Cylindrical Bore |
|
Inner Bore Profile |
1:12 Conical Taper |
Straight Cylindrical |
|
Mounting Hardware |
Adapter sleeve (H series) or tapered shaft |
Direct press fit or interference shaft fit |
|
Shaft Machining |
Plain shafting (h9-h10 tolerance without shoulders) |
Precision machined shaft shoulders (k5/m5) |
|
Clearance Setting |
Adjusted via axial drive-up during tightening |
Determined by initial shaft/housing fits |
|
Maintenance & Removal |
Simplified extraction using sleeve locknuts |
Requires mechanical pullers or hydraulic tools |
Quality Control Process
Raw Material Audit: Spectrographic chemical analysis and ultrasonic flaw detection on 100Cr6 steel stock.
Heat Treatment: Computerized continuous quenching and tempering to achieve 58-65 HRC core/surface hardness.
Precision Grinding: CNC raceway grinding achieving profile tolerances under 0.002 mm and superfinished raceways (Ra <= 0.1 um).
Final Inspection: 100% automated inspection for dimensions, radial runout, internal clearance, and noise/vibration level.
Traceability: EN 10204 3.1 Material Certificates, heat number tracking, and full batch inspection reports available upon request.
B2B RFQ Specification Checklist
Include the following parameters when submitting a Request for Quotation (RFQ):
Bearing Number: Full designation (e.g., 2210K C3)
Adapter Sleeve: Model code if required (e.g., H2210)
Tolerance & Clearance: ISO Class (Normal/P6/P5) and RIC Class (Normal/C3)
Sealing & Cage: Open, 2RS (Contact Seals), 2Z (Shields); Steel, Polyamide (TN9), or Brass (M)
Operating Conditions: Radial load (kN), Axial load (kN), Speed (RPM), Temperature (deg C)
Procurement Volume: Sample/prototype qty, batch size, or annual forecast
Documentation: EN 10204 3.1, Certificate of Origin, ISO/IATF certificates
FAQ
Q: What does the "K" suffix indicate on a self-aligning ball bearing?
A: The "K" suffix specifies a 1:12 tapered inner bore according to ISO designation standards. It indicates that the bearing is designed for adapter sleeve mounting or installation on a tapered shaft seating.
Q: How is internal clearance controlled when installing a tapered bore bearing?
A: Driving the inner ring up the tapered sleeve expands the ring and reduces radial internal clearance. Proper installation requires measuring the clearance reduction using feeler gauges or monitoring the axial drive-up distance according to ISO 5753-1 guidelines.
Q: Can tapered bore self-aligning ball bearings handle heavy axial loads?
A: No. Self-aligning ball bearings are primarily designed for radial loading. While they can accommodate limited double-direction axial loads, applications with heavy, continuous thrust loads should use spherical roller bearings or dedicated thrust bearings.
Q: Do I need to machine precise shaft shoulders when using adapter sleeves?
A: No. One of the main advantages of using a tapered bore bearing with an adapter sleeve is that it can be mounted directly on smooth, plain commercial shafting (h9-h10 tolerance) without requiring machined shoulders or precise location steps.
Q: Are 1200K, 1300K, 2200K, and 2300K series bearings dimensionally interchangeable?
A: No. While bearings across these series may share the same nominal bore diameter, they differ in outside diameter, width, internal construction, and load ratings. Selection must be verified using the complete bearing dimensions and load requirements.
Hot Tags: tapered bore self-aligning ball bearings, China tapered bore self-aligning ball bearings manufacturers, suppliers, factory, Round Hole Disc Bearings

