Full Ceramic Ball Bearings

Full Ceramic Ball Bearings
Details:
Full Ceramic Ball Bearings use high-performance ceramic materials for the inner ring, outer ring, and rolling balls. Unlike hybrid ceramic bearings (which pair steel rings with ceramic balls), full ceramic bearings contain zero metallic components in the raceway assembly.
Send Inquiry
Description
Send Inquiry

Full Ceramic Ball Bearings use high-performance ceramic materials for the inner ring, outer ring, and rolling balls. Unlike hybrid ceramic bearings (which pair steel rings with ceramic balls), full ceramic bearings contain zero metallic components in the raceway assembly. They provide engineered solutions for environments involving high voltages, strong chemical corrosion, non-magnetic requirements, extreme temperatures, or dry/vacuum operating conditions.

 

Full Ceramic vs. Hybrid vs. Steel Bearings

 

Bearing Feature

Full Ceramic Bearing

Hybrid Ceramic Bearing

Standard Steel Bearing

Inner & Outer Rings

Ceramic (Si3N4 or ZrO2)

Bearing Steel (52100 / Stainless)

Bearing Steel (52100 / Stainless)

Rolling Elements

Ceramic (Si3N4 or ZrO2)

Ceramic (Si3N4)

Bearing Steel

Electrical Insulation

100% Non-conductive

Isolates balls only (Rings conductive)

Conductive

Corrosion Resistance

Extreme (Acid / Alkali / Salt)

Moderate (Depends on ring material)

Low to Moderate

Magnetic Property

Completely Non-magnetic

Magnetic (Steel rings)

Magnetic

Maximum Speed Limit

Moderate to High

Very High

Standard

Impact / Shock Load

Low to Moderate (Brittle)

High

Very High

 

Ceramic Material Specifications: Si3N4 Vs. ZrO2

 

Technical Property

Silicon Nitride (Si3N4)

Zirconia (ZrO2)

Bearing Steel (52100)

Density (g/cm³)

3.2

6.0

7.8

Hardness (HV)

1400 - 1700

1200 - 1300

700 - 800

Thermal Expansion Coefficient (10^-6/K)

3.2

10.5

12.5

Max Operating Temp (°C)

800 (Up to 1000)

400 (Up to 500)

120 - 150

Thermal Conductivity (W/m·K)

30

3

46

Electrical Resistivity (Ω·cm)

> 10^14 (Insulator)

> 10^12 (Insulator)

10^-5 (Conductor)

Primary Advantage

High speed, low weight, high temp

Severe chemical & acid resistance

High load & impact strength

 

Manufacturing & Precision Capabilities

 

Specification Category

Available Technical Options

Bearing Series

6000, 6200, 6300, 6800, 6900, Angular Contact, Custom Sizes

Bore Size Range

3 mm to 200 mm (Custom imperial sizes available upon request)

Precision Standard

ISO P0 / ABEC-1, ISO P6 / ABEC-3, ISO P5 / ABEC-5, ISO P4 / ABEC-7

Internal Clearance

C0 (Standard), C2 (Tight), C3 / C4 (Loose for high temp expansion)

Cage / Retainer Material

PEEK, PTFE, Nylon (PA66), Stainless Steel, Full Complement (Cageless)

Sealing Options

Open Type, PTFE Seals (2RS), PEEK Shields (ZZ)

Quality Certifications

ISO 9001:2015, RoHS Compliant, REACH Compliant

 

FAQ

 

Q: How do I choose between Silicon Nitride (Si3N4) and Zirconia (ZrO2)?

A: Choose Si3N4 for high-speed rotation, lighter mass, and extreme thermal variations. Choose ZrO2 for severe chemical immersion, strong acidic/alkaline environments, or applications where thermal expansion needs to match closely with a steel shaft.

Q: Can a full ceramic bearing directly replace a steel bearing of the same size?

A: Not always. While external dimensions may match, ceramic materials are more brittle and handle shock or impact loads differently than steel. Load conditions, thermal expansion, shaft fit tolerances, and internal clearance must be reviewed before replacing steel bearings.

Q: Do full ceramic bearings require grease or liquid lubrication?

A: Full ceramic bearings can run dry in low-speed or specialized vacuum/cleanroom applications without galling. However, adding compatible synthetic grease or vacuum-grade oil significantly reduces friction, lowers operating noise, and extends operational lifespan under continuous load or higher speeds.

Q: What cage material should be selected for harsh environments?

A: PEEK is recommended for higher temperatures, high mechanical strength, and broad chemical exposure. PTFE offers maximum chemical inertness for ultra-corrosive media. Full Complement (cageless) designs suit low-speed, extremely high-temperature conditions where polymers degrade.

Q: What quality inspection documentation is provided for OEM procurement?

A: Every OEM batch includes Dimensional Inspection Reports (Bore, OD, Width, Runout), Material Mill Certificates, Internal Clearance Verification Records, and Certificate of Conformance (CoC) matching ISO 9001 quality management standards.

Hot Tags: full ceramic ball bearings, China full ceramic ball bearings manufacturers, suppliers, factory, Double Row Cylindrical Roller Spindle Bearings

Send Inquiry